Message Recording And Playback - Honeywell LYNX Touch User Manual

The LYNX Touch Message Center allows you to record, play and delete messages. The
maximum message duration is 180 seconds.
NOTES: (1) If the system loses electrical power, all messages will be erased.
(2) Message Play/Record will not be available if a report must be sent.
Entering message mode
Ready To Arm
Arm Away Arm Stay
10:18 AM June 8, 2010
Recording a message
Ready To Arm
Add New Play
Ready To Arm
Message 2
Record Play

Message Recording and Playback

1.
Zones System
Message
More
5000-400-055-V1
1. Select "Add New". The system displays the
Delete All Save
5000-100-045-V0
2. Select "Record", the system will sound a
Stopped
3. When you are finished recording your
4. To listen to the message, select "Play".
5. If you wish to delete the message, select
Delete
5000-100-047-V0
– 39 –
USER FUNCTIONS
With the system in the disarmed state,
select the "Message" icon from the Home
Screen. The system displays the Message
screen.
Record Message screen.
single tone. Speak into the microphone and
record your message.
message, select. "Stop"
"Delete".