Honeywell LYNX Touch User Manual page 47

Ready To Arm
Name
Type
Trigger Output
Start Zone Type Stop Zone Type
Not Used Not Used
Start System Operation Stop System Operation
Not Used Not Used
8. Select "Action". Dependant upon the Type
01
Action
None
9. Select "Start Zone Type". The system displays
Save
5000-100-189-V0
10. Select "Stop Zone Type". The system displays
11. Select "Start System Operation". The system
12. Select "Stop System Operation". The system
– 47 –
USER FUNCTIONS
Programming Devices
selected previously, the system scrolls between
several options:
None
Permanent On
On for 2 sec
Pulsing
Send
the following options:
Not Used
Entry Exit 2
Interior Follower
24 Hour Silent
Use the "" "" buttons to scroll to second
page of zone type options.
Silent Burglary
Interior With Delay
Carbon Monoxide
No Response
Use the "" "" buttons to scroll to third page
of zone type options.
Arm Away
Monitor
Resident Response
General Response
the same options as step 9.
displays the following options:
Not Used
Arm Away
Any Burglary Alarm
Bell Timeout
Use the "" "" buttons to scroll to second
page of zone type options.
Start of Entry Delay
Kissoff
System Low Battery
Duress Alarm
displays the same options as step 11.
Use the "" "" buttons to scroll to second
page of options.
Entry Exit 1
Perimeter
Day/Night
24 Hour Audible
24 Hour Auxiliary
Fire No Verification
Trouble
Arm Stay
Disarm
Resident Monitor
General Monitor
Arm Stay
Disarm
Any Fire Alarm
End of Exit Delay
Chime
Bypass
Reporter Failure