Sony NSR-1100 User Manual page 99

When event/alarm action for a specific date
and time:
Configure the start date and time and end date and time
to apply the event/alarm action.
E Action Duration
Configure the duration for the action.
Action Start
This displays the timing for starting the action.
This item cannot be changed.
Stop Action
Select the timing for ending the action.
From Event Start
This ends the action at the point in time a specified
time elapses after the event started.
When this is selected, enter the period for after the
event starts within the range of 1 to 3,600 seconds.
From Even End
This ends the action at the point in time a specified
time elapses after the event ends.
When this is selected, enter the period for after the
event ends within the range of 1 to 3,600 seconds.
No Definition
The timing to end the action is not specified.
F Server
Select the remote server.
This item is not displayed in the case of a client.
G Event
Configure the event that will be the trigger for the action.
Camera
Select the check box of the input pin to be the action
trigger.
IO Device
Select the check box of the input pin to be the action
trigger.
Note
The input configured for each camera and I/O device
is displayed in the list. For the input pin settings, refer
to "Configuring Motion Detection Settings" (page 62)
and "Configuring Sensor Inputs" (page 88).
System Alert
Select the check box to use a system alert as the
trigger.
H Action
Configure the action to perform.
Alarm Notification
Send an alarm notification for the configured trigger.
Action
This performs the specified action.
[Camera Action] Tab
Number of Settings
This displays the number of cameras target for the
action.
[Add Device] Button
This displays a dialog box for adding a camera as a
target for the action.
Camera Drop-down Menu
Select a camera.
Camera Control
Select the check box to perform an action for
controlling the camera, and specify the control
method.
Preset
This returns the camera to the specified preset
position.
Tour
This performs the specified camera tour.
Action End Preset
Specify the preset position for when the action
ends.
Pin List
Select the check boxes for the output pins to be target
for performing an action to change the pin state.
99
Configuring Action Settings