Sony NSR-1100 User Manual page 19

HDD Events
Notify when a hard disk drive malfunctions.
RAID Events
Notify when a RAID group rebuilds.
File System Event
Notify when a file system malfunction occurs.
Network Events
Notify when a network device malfunction occurs.
Resource Usage Events
Notify when the management domain of the hard disk
drive or percentage of CPU used is abnormally high.
SAS Events
Notify when a connected NSRE-S200 malfunctions.
Setting Items of UPS Screen
Configure settings related to UPS, and click [OK].
Enable
Select this when using a UPS.
If this is selected, select the type of UPS to be used from a
list of UPS.
Caution
If the power turns off suddenly during operation, the data
may be corrupted. In particular, when using the unit
together with an NSRE-S200 or other expansion storage,
use a UPS.
Disable
Select this when not using a UPS.
Power off in XXX Seconds
Enter the time from when a power cut is detected until
shutdown to start.
Caution
For details on automatic startup after power is restored,
contact your dealer.
Setting Items of Auto Logon Screen
When you want to enable the auto logon function, select
the [Enable Auto Logon] check box, and click [OK].
Setting Items of Serial Port (Analog
Camera) Screen
Configure settings related to the analog camera
connection.
Configure each item, and click [OK].
(This screen appears when an NSR-1050H or NSBK-A16
(option) is connected.)
Serial standard (RS-485, RS-422, RS-232C)
Select the serial standard for connecting to the analog
camera you want to control.
Baud rate
Select the communication baud rate.
Parity bit
Select the parity bit.
Character length
Select the character length.
Stop bits
Select the stop bits.
Changing Initial Settings with the Setup Menu
19