Sony NSR-1100 User Manual page 98

3
Select [Action] in the tree, and select [New Action].
The New Action dialog box appears.
4
Configure each item, and click [OK].
1 2
5
For details on each of the items, refer to "Setting Items
of New Action Dialog Box (Event/Alarm Action)"
(page 98).
1 Select [Event/Alarm Action].
2 Enter a name for the event/alarm action.
3 Select the check boxes for the days you want to run
the event/alarm action, and configure a start time
and end time for the event/alarm action.
4 Configure the timing for ending the action.
5 Configure the event that will be the trigger for the
action.
6 Configure the action to perform.
7 Click [OK].
The event/alarm action is created.
5
Click [Apply].
The event/alarm action is saved.
For details on how to view the schedule, refer to "Setting
Items of Schedule Screen" (page 85).
98
Configuring Action Settings
Setting Items of New Action Dialog Box
(Event/Alarm Action)
This dialog box is displayed by selecting [Action] from the
tree in the Schedule Configuration screen, and then
clicking [New Action].
After configuring each item, click [OK].
Screen example: When recurrent event/alarm
action:
A
3
4
6
7
A Schedule Action and Event/Alarm Action
Select the type of event/alarm action to configure.
The setting items vary depending on this selection.
B Name
Enter the name of the event/alarm action. It can be up to 32
characters long.
C Enable
Select the check box to enable this event/alarm action.
D Schedule
The settings differ depending on whether you are
configuring a recurrent event/alarm action or an event/
alarm action for a specific date and time.
When recurrent event/alarm action:
Select the check boxes for the days you want to run the
event/alarm action, and configure a start time and end
time for the event/alarm action.
The range that can be specified is 00:00:00 to 23:59:59
(hours/minutes/seconds).
B C
G H
D
EF
I J