Sony NSR-1100 User Manual page 27

2
Enter the user name and password, and click [Logon].
• If you log on with the [Auto-Logon] check box
selected, the logon screen will not appear the next
time you start the application, and you will be logged
on automatically.
• To change the user that you are logged on as, first
log off from the Main screen.
• To enable the auto logon function, configure it from
the [Setup Menu] of the Administration Menu.
Caution
The selection status of the check box is applied each
time you log on.
Therefore, you must log on once in order for an
unselected status to be applied.
Note
The first time you turn on the NSR, the administrator
is the only user registered on the system. The default
user name for the administrator is as follows.
User name: admin
Password: admin
27
Logging On to the NSR