Table of Contents
Advertisement
5
RINGER FUNCTION
Ringer operation
The ringer function is used to call a waiting station with a ring
or similar tones. 10 kinds of ring tones are available.
q Select the desired channel with the [Y]/[Z] switches.
w Push [
] for a desired time to call the waiting station.
• "S" appears while transmitting a ring tone.
• The ringer tones are repeatedly transmitted when this key is
pushed and held.
e Waiting station receives the ringer tones.
r Operate the transceiver in the normal way.
Ringer pattern
10 ringer patterns are available. Select the desired ringer pat-
tern as follows:
q While pushing [Z] + [
pattern set mode.
• "RG" and the selected ringer pattern
number appear.
w Push [Y] or [Z] to select the
ringer pattern.
• The selected pattern is played once.
e Turn power OFF to exit set
mode.
10
[
], turn power ON to enter ringer
Ringer pattern 3
Ringer timer
Ringer time is the minimum transmission time of the ringer
tones when the auto channel function is in use. 0 to 16 sec. in
1 sec. steps can be programmed.
q While pushing [Y] + [?], turn power ON to enter set mode.
• Set mode is not available depending on dealer setting.
w Push [?] several times until "Rt" appears.
e Push [Y] or [Z] to select the ringer timer.
r Turn power OFF to exit set mode.
2 sec. ringer time
The minimum transmit time can be set greater than the wait-
ing period of the auto channel function. (p. 11) The recom-
mended ringer time depends on the number of receive
stations:
2 or 3 channels
2 sec.
4 or 5 channels
3 sec.
6 or 7 channels
4 sec.
[
Advertisement
Table of Contents
