Table of Contents
Advertisement
y CUSTOMIZABLE KEY 1 [ ] (p. 6)
u CUSTOMIZABLE KEY 2 [ ]
Activate the following customizable functions. 2 functions
can be programmed into the [ ]/[ ] key at power ON.
• These function cannot be changed depending on dealer setting.
[NULL]
Null switch (backlight when used)
[CODE]
CTCSS tone/DTCS code switch
[A/S]
All/select channel switch (default of [ ])
[SCAN]
Scan switch
[PO BEEP]
Pocket beep switch
[MY NAME]
"My name" switch (default of [ ])
[AUTO CH]
Auto channel switch
NOTE: In this manual, the customizable keys are repre-
sented by the [
f
] icon. Operations which require a cus-
tomizable key observe the following style—
Push [
f
(FUNCTION)]
where "
f
" indicates the key is customizable and "FUNC-
TION" indicates the assigned function e.g. CODE, etc.
i RINGER KEY [
]
Transmits a ringer tone.
• 1 of 10 ringer types can be selected at power ON. (p. 10)
• When the auto channel function is activated, pushing this key re-
peatedly transmits the ringer tone for the ringer time.
PANEL DESCRIPTION
o FUNCTION DISPLAY (p. 4)
!0 TRANSMIT INDICATOR (p. 5)
Lights red while transmitting.
!1 EXTERNAL DC POWER JACK [CHARGE]
Connect a 12 to 16 V DC power source using the optional
cables, CP-12L or OPC-254L, to charge the attached bat-
tery pack; or connect the BC-110D (non-U.K. versions) wall
charger for charging.
CAUTION:
This connection is for charging ONLY.
Power to the transceiver must be turned OFF during
charging.
!2 SPEAKER/MICROPHONE
!3 EXTERNAL SPEAKER AND MICROPHONE JACKS
[SP/MIC]
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when either is connected. (See p. 23 for a list of
available options.)
!4 ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.
2
3
Advertisement
Table of Contents
