Fujitsu STYLISTIC Q335 Operating Manual page 55

Hide thumbs Also See for STYLISTIC Q335:
Table of Contents

Advertisement

Error message/cause
CMOS Battery Bad
If the error message occurs repeatedly, the
buffer battery in the Tablet PC is flat.
System CMOS checksum bad - Default configuration
used
The system configuration information is
incorrect.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory. an error
has resulted at the address xxxx.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
Keyboard controller error
Keyboard error
nn Stuck key
Operating system not found
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
Real time clock error
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
System battery is dead - Replace and run SETUP
Fujitsu
Troubleshooting
► Contact your sales outlet or our customer
service center.
► Switch the Tablet PC off.
► Switch the Tablet PC on.
► Keep the volume button and the shortcut
button pressed and switch the Tablet PC
on. If you keep the volume button pressed
during the boot process, you can switch into
the BIOS Setup-
► In the BIOS Setup, select the Exit menu.
► Select the entry Load Setup Defaults.
► Select OK and press the Enter key.
► Contact your sales outlet or our customer
service center.
► Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
► Switch your Tablet PC off with the ON/OFF
button.
► Wait 3 - 5 seconds and switch the Tablet PC
on again.
If you use an external keyboard:
► Check the connection and reboot the Tablet
PC.
► Make sure that no key is pressed.
► Check in the BIOS Setup whether your hard
disk has been set correctly.
► Make sure that the operating system is
installed on the corresponding drive.
► Press the
Alt
tablet button to boot the
operating system
► Contact your sales outlet or our customer
service center.
► Contact your sales outlet or our customer
service center.
► Contact your sales outlet or our customer
service center.
Troubleshooting and tips
53

Advertisement

Table of Contents
loading

Table of Contents