Table of Contents
Advertisement
Additional safety notes for devices with
wireless components
Bluetooth,Safetynotes
Wireless LAN
Wireless components
If a radio component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must be
sure to observe the following safety precautions concerning your Tablet PC:
•
Switch off the wireless components when you are in an aircraft or driving in a car.
•
Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
•
Switch off the wireless components, when you let the device get near flammable
gases or into hazardous environments (e.g. gas station, paint stores), as the
transmitted radio waves can cause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to section
Protecting the display screen
In this event, do not pour liquids onto the device and do not wash it with a wet cloth.
Do not place any objects on the screen, so that it will not be damaged.
The warranty does not cover a scratched screen.
Energy saving
Power saving
Notes
Energy
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental pollution is reduced.
You save money and help protect the environment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"Using the energy saving functions", Page
Traveling with your Tablet PC
Mobile operation
Notes
Transportation
TabletPC
Please follow the instructions below when traveling with your Tablet PC.
Fujitsu
"Switching the wireless components on and off", Page
34.
Important notes
36.
13
Advertisement
Table of Contents
Troubleshooting
