Back Panel; Side Panel - Linksys SRW224G4P User Manual

Chapter 2
MnGBIC (1-2) The Switch is equipped with
two miniGBIC ports that have shared Gigabit
Ethernet ports (G3 and G4) which provide for
the installation of one expansion module . These
ports provide links to high-speed network
segments or individual workstations at speeds of
up to 1000Mbps (Gigabit Ethernet) .
To establish a Gigabit Ethernet connection using
a miniGBIC port, you will need to install a MGBT1,
MGBSX2, or MGBLH1 Gigabit expansion module
and use Category 5e cabling or fiber optic
cabling .
To establish a Fast Ethernet connection using a
miniGBIC port, you will need to install a MFEFX1
(100BASE-FX) or MFELX1 (100BASE-LX) 100SFP
Transceiver and use fiber optic cabling .

Back Panel

The console and power ports are located on the back
panel of the Switch .
Back Panel
POWER The Power port is where you will
connect the AC power .
CONSOLE
The Switch is equipped with a
serial port labeled Console (located on the
back of the switch) that allows you to connect
to a computer's serial port (for configuration
purposes) using the provided serial cable . You
can use HyperTerminal to manage the Switch
using the console port .

Side Panel

The security slot is located on a side panel of the Switch .
Side Panel
SECURITY SLOT The security slot can be
utilized to attach a lock to the Switch .
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Product Overview
4