Connecting To The Switch Through A Telnet Session; Figure 4-4: Com1 Properties; Figure 4-5: Telnet Login Screen - Linksys SRW208 User Manual

WebView Switches
4. Set the serial port settings as follows:
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Then, click the OK button.

Connecting to the Switch through a Telnet Session

Open a command line editor and enter telnet 192.168.1.254. Then, press the Enter key.
The Login screen will now appear. The first time you open the CLI interface, select Edit and hit Enter. Enter admin
in the User Name field. Leave the Password field blank.
Press the Esc button and you will return to the login screen. Use the right arrow button to navigate to Execute
and press the Enter button to enter the CLI interface.
Chapter 4: Using the Console Interface for Configuration
Connecting to the Switch through a Telnet Session

Figure 4-4: COM1 Properties

Figure 4-5: Telnet Login screen

17