Table of Contents
Advertisement
4-3 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
MENU
PRESET
PRESET
SAVE
SAVE
NAME1
W1200mm
SETUP SHEET
Description
Using the [PRESET] menu lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu item every time you change the media can be troublesome. That's why it can be useful
to save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media,
you can change the menu-item settings to the optimal values for the media simply by loading the preset you saved.
Menu items that can be saved in presets are listed below.
[PRINT] (Print heater), [DRYER]
P. 39, "Settings for the Media Heating System"
[EDGE DETECTION]
P. 78, "Using Transparent Media"
[SCAN INTERVAL]
P. 78, "Printing Hard-to-dry Media"
[VACUUM POWER]
P. 79, "Preventing Media from Coming Loose"
[FULL WIDTH S]
P. 79, "Speeding Up Output for Narrow Media"
[FEED FOR DRY]
P. 88, "Drying the Trailing Edge of the Printing Area on the Dryer"
[CALIBRATION]
(in the [CUTTING MENU])
P. 77, "Performing Distance Correction During Cutting"
[FORCE], [SPEED], [OFFSET], [UP-SPEED]
P. 89, "Fine-tuning the Cutting Conditions"
Up to eight types of presets can be saved. You can assign a name to each one. Using media names for these may aid
recognition and clarity.
P. 71, "Loading a Saved Preset," "Assigning a Name to a Preset"
70
Chapter 4 Feature Reference
Press
.
Press
.
Press
.
Press
.
Use
to select any one from "NAME1" to "NAME8."
Press
to save.
The present menu settings are saved in the preset you chose in step
Press
to go back to the original screen.
[ADJUST BI-DIR SIMPLE SETTING]
[ADJUST BI-DIR DETAIL SETTING]
[CALIBRATION]
[PRINT-CUT ADJ.]
[CROP-CUT ADJ.]
[PREHEATING]
P. 73, "Correcting for Misalignment in Bidirectional Printing"
P. 74, "Correcting for Misalignment in Bidirectional Printing More
Precisely"
P. 76, "Performing Feed Correction to Alleviate Horizontal Bands
and the Like"
P. 92, "Correcting Misalignment of the Printing and Cutting Po-
sitions"
P. 99, "Correcting Misalignment for Printing and Cutting When
Using Crop Marks"
P. 87, "Determining How the Media Heating System Operates"
.
Advertisement
Table of Contents
