Robertshaw 300-224 Installation And Programming Instructions page 34

(Example: If you set the cooling temperature less than two degrees above the
heating temperature, the thermostat will automatically maintain a two degree
separation between heating and cooling by lowering the heating temperature.
4. Press the s or t button to adjust to the desired cooling temperature.
rdc Tu DI FT
5. Press the PROGRAM button until the day symbol is displayed and the coaling
0:00-
temperature flashes.
6. Press the s or t button to adjust to the desired temperature.
7. Press the PROGRAM button until the evening symbol is displayed and the
coaling temperature flashes.
8. Press the s or t button to adjust the desired temperature.
9. Press the PROGRAM button until the night symbol is displayed and the cool-
ing temperature flashes.
10.Press the s or t button to adjust to the desired temperature.
11.Press the RESUME button.
34