Built In Time Switch A - Biasi RIVA ADVANCE HE M110B.24SM/C User Manual And Installation Instructions

2.7

Built in time switch A

The combi boilers are equipped with a built
in electronic time switch (5, Fig. 1.3 on page
8) which controls the c.h. operation.
I
H
G
F E
Fig. 2.13
Display and control panel:
A Mode selector switch
B Reset button
C Enter button
D Increase "+" setting button
E Decrease "-" setting button
F On-off button
G Day selection buttons
H Day display
I Time display
J ON-OFF display
Setting the current time and weekday
Note: with a new unit or when the reset but-
ton B has been pressed, the first day indi-
cator H on the left and the time display I is
flashing.
Set the mode selector switch A to the
sition and press the buttons D or E until the
current time appears in the display I.
Press the day selection button correspond-
ing to the current day, considering that but-
ton 1=Monday, button 2=Tuesday and so
on.
- 14 -
INSTRUCTIONS FOR USE
D C B
po-
The clock starts by moving the switch A to
the AUTO position.
Setting example shown in Fig. 2.14:
Current time 16.30, day Thursday.
J
A
Fig. 2.14
Setting the switching time and day (or
days)
20 memory locations are available, corre-
sponding to 10 on-off sequences.
Set the mode selector switch A to the C1
position.
The symbols shown in Fig. 2.15 appears in
the display.
Fig. 2.15
Press the buttons D or E to set the desired
ON time.
Press the buttons G to set the desired day
or days of operation.
Press the "enter" button C to confirm the
setting and to continue programming the
OFF time.
Set the OFF time as explained above for the
ON setting and confirm by pressing the "en-
ter" button C. Proceed in the same way for
other settings.
Setting example shown in Fig. 2.16:
• ON time 7.45, day Monday to Friday.
K OFF time 10.30, day Monday to Friday.
A
A