TRENDnet TEW-817DTR User Manual page 61

TRENDnet User's Guide
In the Security Mode drop-down list, select WPA-Personal, WPA2-Personal, or WPA2-
Personal Mixed. Please review the WPA-Personal settings to configure and click Apply
to save the changes.
The following section outlines options when selecting WPA-Personal, WPA2-Personal,
or WPA2-Personal Mixed (Preshared Key),
 WPA Cipher: Select a Cipher Type to use.
o When selecting WPA2-Personal Mixed security, it is recommended to use
TKIP/AES.
o When selecting WPA2-Personal security, it is recommended to use AES.
 WPA Pre-Shared Key: Enter the passphrase.
o This is the password or key that is used to connect your computer to this router
wirelessly
Key Format: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
 Key Update Interval: Enter the time interval (seconds) of when the network
passphrase will rotate.
Note: It is recommended to use the default interval time. Your passphrase will not
change, rotation of the key is part of the WPA protocol and designed to increase
security.
© Copyright 2015 TRENDnet. All Rights Reserved.
Selecting WPA-Enterprise / WPA2-Enterprise / WPA2-Enterprise Mixed
(WPA2-Personal recommended):
The following section outlines options when selecting WPA-Enterprise, WPA2-
Enterprise, or WPA2-Enterprise Mixed (EAP or RADIUS). This security type is also known
as EAP (Extensible Authentication Protocol) or Remote Authentication Dial-In User
Service or RADIUS.
Note: This security type requires an external RADIUS server, Pre-Shared Key only requires
you to create a passphrase.
 WPA Cipher: Select a Cipher Type to use.
o When selecting WPA2-Personal Mixed security, it is recommended to use
TKIP/AES.
o When selecting WPA2-Personal security, it is recommended to use AES.
 Key Update Interval: Enter the time interval (seconds) of when the network
passphrase will rotate.
Note: It is recommended to use the default interval time. Your passphrase will not
change, rotation of the key is part of the WPA protocol and designed to increase
security.
 RADIUS Server Address: Enter the IP address of the RADIUS server. (e.g.
192.168.10.250)
 RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note: It is recommended to use port 1812 which is typical default RADIUS port.
 RADIUS Server Shared Secret: Enter the shared secret used to authorize your
router with your RADIUS server.
TEW-817DTR
60