TRENDnet User's Guide
Bottom View
Ethernet
Port
Ethernet Port: Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices. When Router mode is selected the
port becomes WAN port that allows you to connect to the Internet. When AP+WISP
mode is selected the port becomes a LAN port that allows you to connect wired
clients of to connect to an existing network.
Mode Switch: Router mode allows you to connect the device to an existing
network. AP + WISP mode sets the device into Access Point mode where you can
configure the device into an access point, WISP client or Repeater. Select Off to turn
off the device.
© Copyright 2015 TRENDnet. All Rights Reserved.
Application Diagram
Off / Mode
Switch
The router is installed near the hotel's internet connection port which connects to the Internet.
2.4GHz wireless signals from the router are broadcasted to wireless clients such as laptops (with
wireless capability) and the less congested 5GHz wireless signals from the router are broadcasted
to other wireless client devices such as TVs, game consoles, or media bridges thereby providing
Internet access for all wireless client devices.
TEW-817DTR
5