Dhcp Clients List - 3Com WL-603 User Manual

1 Enter the Router's IP Address and Subnet Mask in the appropriate fields.
2 If you want to use the Router as a DHCP Server, check Enable in the DHCP
3 Enter the IP address range in the IP Pool Start Address and IP Pool End
4 Specify the DHCP Lease time by selecting the required value from the
5 Specify the Local Domain Name for your network (this step is optional).
6 Enter the IP address of the NBX Call Processor in the 3Com NBX Call
7 Check all of your settings, and then click Apply.

DHCP Clients List

The default IP address is 192.168.1.1.
Server field.
Address fields.
Lease Time drop-down menu. The lease time is the length of time the
DHCP server will reserve the IP address for each computer.
Processor field (this step is optional).
The DHCP Clients List provides details on the devices that have received IP
addresses from the Router. The list is only created when the Router is set
up as a DHCP server. A maximum of 253 clients can be connected to the
Router.
Figure 42 DHCP Clients List Screen
For each device that is connected to the LAN, the following information is
displayed:
IP address — The Internet Protocol (IP) address issued to the client
■
machine.
LAN Settings 55