Using A K-Mount Lens - Ricoh Pentax Q-S1 Start Manual

About Hoods
When using a hood with a 02 STANDARD ZOOM lens, be sure
to use the PH-RBB 40.5mm. If the PH-SBA 40.5mm is used,
vignetting may occur at the wide-angle setting.
About Filters
Vignetting will occur at the wide-angle setting if the 100 PL
FILTER is used with a 02 STANDARD ZOOM lens.

Using a K-Mount Lens

A K-mount lens can be attached to this camera with the use
of the optional Adapter Q for K Mount Lens. When a K-mount
lens is used, the focal length must be set manually for some
functions such as Shake Reduction, since the focal length
cannot be obtained automatically.
1
Turn the camera off.
2
Attach the adapter and lens to the camera,
and turn the camera on.
The [Input Focal Length] screen appears.
3
Set the lens focal length.
4
tMemo
• The focal length setting can be changed in [Input Focal
• When the Adapter Q for K Mount Lens is used, the camera
• Refer to the Adapter Q for K mount lens manual for details.
15.0 15.0
Input Focal Length Input Focal Length
21.0 21.0
35.0 35.0
55.0 55.0
0000.0 0000.0
77.0 77.0 mm mm
135.0 135.0
200.0 200.0
300.0 300.0
Cancel Cancel OK OK
MENU OK
Available operations
AB
Changes the value of each digit.
CD
Selects a digit.
V
Selects a value from the list.
When using a zoom lens, select the actual focal length
which the zoom is set to.
Press E.
The camera returns to standby mode.
Length] of the A2 menu.
operates in J mode when the capture mode is set to other
than L mode.
31