Table of Contents
Advertisement
Chapter 3
3.
On the Adapter's PIN number screen, click
Enter the PIN Number
4.
The Adapter connects to the network.
Connecting to the Network
5.
Click
Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Dual-Band Wireless-N USB Network Adapter
Next.
Congratulations! The Adapter is connected to
Wireless Network Status
The Wireless Network Status screen provides information
on your current network settings.
Radio Band
Wireless Network Name
of the wireless network.
Wireless Mode
currently in use.
Wide Channel
used with a 40 MHz radio band network.
Standard Channel
wireless network.
Security
feature.
Authentication
authentication method.
Network Type
IP Address
Subnet Mask
Default Gateway
DNS1
MAC Address
network's wireless router or access point.
Signal Strength
signal strength.
Link Quality
the wireless network connection.
Statistics
Statistics screen.
Advanced Configuration
the network.
Wireless Network Status
This is the radio band used on the network.
This is the unique name (SSID)
This is the mode of the wireless network
This is the Wireless-N primary channel
This is the channel used by your
This is the status of the wireless security
This
is
your
This is the wireless network type.
This is the IP Address of the Adapter.
This is the Adapter's Subnet Mask.
This is the Default Gateway address.
This is the DNS address of the Adapter.
This is the MAC address of the wireless
The Signal Strength bar indicates the
The Link Quality bar indicates the quality of
Click Statistics to go to the Wireless Network
wireless
network's
5
Advertisement
Table of Contents
