Table of Contents
Advertisement
Chapter 3
Use the Push Button
Use the Push Button
1.
Press the
Wi-Fi Protected Setup button on the
router.
2.
Within two minutes, click the
button
on this screen.
3.
The Adapter connects to the network.
Connecting to the Network
Dual-Band Wireless-N USB Network Adapter
Wi-Fi Protected Setup
Advanced Configuration
Print to print out your wireless network settings.
4.
Click
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Congratulations! The Adapter is connected to
the network.
Enter the Adapter's PIN Number
Enter the PIN Number
1.
Access the web-based utility of the router. (Refer to the
router's documentation for instructions.)
2.
On the router's
Wi-Fi Protected Setup screen, enter
the Adapter's PIN number in the PIN field. Then click
Register.
9
Advertisement
Table of Contents
