Linksys WUSB600N (EU) User Manual page 22

Dual-band wireless-n usb network adapter
Hide thumbs Also See for WUSB600N (EU):
Table of Contents

Advertisement

Chapter 3
Default Gateway
Enter the IP address of your
network's Gateway.
DNS 1 and DNS 2
Enter the DNS address of your
wired Ethernet network.
Click Next to continue, or click Back to return to the
previous screen.
3.
The
Wireless Mode screen shows a choice of two
wireless modes.
Wireless Mode
Infrastructure Mode
to connect to a wireless router or access point.
Ad-Hoc Mode
Select this mode if you want to
connect to another wireless device directly without
using a wireless router or access point.
Wireless Network Name
name (SSID) that must be used for all devices in
your wireless network. It is case-sensitive and
should be a unique name to help prevent others
from entering your network.
Click Next to continue, or click Back to return to the
previous screen.
4.
If you chose Infrastructure Mode, go to step 5 now.
If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen appears.
NOTE:
The Adapter only supports Ad-Hoc Mode
for 2.4 GHz networks: Wireless-B, Wireless-G,
and Wireless-N (using 2.4 GHz).
Dual-Band Wireless-N USB Network Adapter
Select this mode if you want
Enter a wireless network
Advanced Configuration
Ad-Hoc Mode Settings
Standard Channel
for your wireless network. If you are unsure about
which channel to use, keep the default, Auto.
Click Next to continue, or click Back to return to the
previous screen.
5.
If your wireless network does not have wireless security,
select Disabled and then click Next to continue.
Proceed to step 6.
Wireless Security
If your wireless network has wireless security, select
the method of security used: WEP, WPA Personal,
WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or
RADIUS. WEP stands for Wired Equivalent Privacy, and
WPA stands for Wi-Fi Protected Access. WPA2 stands
for Wi-Fi Protected Access 2. WPA is a stronger security
method than WEP. WPA2 is a stronger security method
than WPA. RADIUS stands for Remote Authentication
Dial-In User Service. Click Next to continue, or click
Back to return to the previous screen.
Proceed to the section for your security method.
Select the correct channel
19

Advertisement

Table of Contents
loading

Table of Contents