Chapter 3
3.
On the Adapter's PIN number screen, click
Enter the PIN Number
4.
The Adapter connects to the network.
Connecting to the Network
5.
Click
Print to print out your wireless network settings.
Then click Finish to return to the Status screen, or click
Exit to exit the Monitor.
Congratulations
Dual-Band Wireless-N USB Network Adapter
Next.
Congratulations! The Adapter is connected to
Enter Key Manually
Proceed to the appropriate section, "Wireless Security
Disabled" or "Wireless Security Enabled".
Wireless Security Disabled
If you connect to a network whose wireless security is
disabled, then you will view this screen:
1.
Click
2.
Click
Congratulations! The Adapter is connected to
Advanced Configuration
the network.
Click Connect Anyway
Connect Anyway.
Finish.
Congratulations
the network.
10