IBM i 830 Repair Manual page 284

B6xx (including A6xx)
Reference Description/Action Perform all actions before exchanging
Code Failing Items
69C9 Abnormal or unexpected HSL OptiConnect disconnection from
a remote system or partition.
The local system or partition disconnected from a remote
system or partition due to an failure in a LIC virtualized bus
unit. LIC will attempt to recover from the error. Possible causes
are:
v LIC problem where the local bus unit is off line.
v LIC problem where the remote bus unit is off line.
Examine the Service Action Log (SAL) on the local system or
partition for HSL Opticonnect failures that occurred at
approximately the same time this error occurred.
Examine the remote system or partition for problems. Examine
the Service Action Log (SAL) on the remote system or partition
for HSL Opticonnect problems that occurred at approximately
the same time this error occurred.
Collect all the Product Activity Log information for this failure
on all systems and partitions on this HSL loop. Be sure to
record all words in the SRCs. Contact your next level of
support with the information you have collected.
69CF Abnormal or unexpected HSL OptiConnect disconnection from
a remote system or partition.
LIC internal error. All systems participating in HSL
OptiConnect will be disconnected. The system must be re-IPL'd
to recover. Before re-IPL'ing the system initiate a main store
dump.
After getting the dump, examine the Service Action Log (SAL)
on the local system or partition for HSL Opticonnect failures
that occurred at approximately the same time this error
occurred.
Examine the remote systems or partitions for problems.
Examine the Service Action Log (SAL) on the remote systems
or partitions for HSL Opticonnect problems that occurred at
approximately the same time this error occurred.
Collect all the Product Activity Log information for this failure
on all systems and partitions on this HSL loop. Be sure to
record all words in the SRCs. Contact your next level of
support with the information you have collected.
69D0 Bus Expansion Adapter card failed
An internal error was detected on a local optical link card.
Perform "BUS-PIP1" on page 285.
270
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
Failing Item Location
AJDG301
REM_SYS
LOC_SYS
AJDG301
FI00182
FI00055
AJDG301