Dot1X Status; Dot1X Server - Planet WGSW-24040 User Manual

disable: Disable 802.1X
(default: Show 802.1X mode)
Default Setting:
Disable
Example:
Enable IEEE802.1x founction for port1
SWITCH/>dot1x mode enable

Dot1x Status

Description:
Set or show the 802.1X port state.
Syntax:
Dot1x State [<port_list>] [macbased|auto|authorized|unauthorized]
Parameters:
<port_list>: Port list or 'all', default: All ports
macbased : Switch performs 802.1X authentication on behalf of the client
auto : Port access requires 802.1X authentication
authorized : Port access is allowed
unauthorized: Port access is not allowed
(default: Show 802.1X state)
Default Setting:
Authorized
Example:
Change IEEE802.1x mode in auto.
SWITCH/>dot1x state 1 auto

Dot1x Server

Description:
Set or show the RADIUS server IP address.
User's Manual of WGSW-24040 / WGSW-24040R
278
SGSW-24040 / SGSW-24040R