Set Up Policy Rules - Planet WGSW-24040 User Manual

The page includes the following fields:
Object
•

Set up Policy Rules

•
Set up Port Policies
•
Set up Typical Network
Application Rules
•
Set up Source MAC
and Source IP Binding
•
Set up DoS Attack
Detection Rules
4.11.3.1 Set up Policy Rules
Set up the default policy rules for Client ports, Server ports, Network ports, and Guest ports.
Policy 2 for client ports: Limit the allowed rate of broadcast and multicast frames.
Policy 3 for server ports: Common server access only. (DHCP, FTP, Mail, and WEB server)
Policy 4 for network ports: Limit the allowed rate of TCP SYN flooding and ICMP flooding.
Policy 5 for guest ports: Internet access only.
The screen in Figure 4-11-3
Description
Set up the default policy rules for Client ports, Server ports, Network ports and
Guest ports.
Group ports into several types according to different ACL policies.
Set up the specific ACL for different typical network application access control.
Strictly control the network traffic by only allowing incoming frames that match the
source IP and source MAC on specific port.
Set up the specific ACL to detect DoS attack.
appears.
Figure 4-11-3 Set up Policy Rules page screenshot
User's Manual of WGSW-24040 / WGSW-24040R
173
SGSW-24040 / SGSW-24040R