Planet WGSW-24040 User Manual page 177

•
Switch
•
Action
•
Rate Limiter
•
Logging
• Shutdown
The ACL configuration wizard is finished, and the new configuration is ready for use.
through 8.
Select the switch to which this ACE applies.
• Any: The ACE applies to any port.
• Switch n: The ACE applies to this switch number, where n is the number of
the switch.
Specify the action to take with a frame that hits this ACE.
Permit: The frame that hits this ACE is granted permission for the ACE
•
operation.
• Deny: The frame that hits this ACE is dropped.
Specify the rate limiter in number of base units. The allowed range is 1 to 15.
Disabled indicates that the rate limiter operation is disabled.
Specify the logging operation of the ACE. The allowed values are:
• Enabled: Frames matching the ACE are stored in the System Log.
• Disabled: Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate is limited.
Specify the port shut down operation of the ACE. The allowed values are:
• Enabled: If a frame matches the ACE, the ingress port will be disabled.
• Disabled: Port shut down is disabled for the ACE.
Figure 4-11-7 Access Control List Configuration page screenshot
User's Manual of WGSW-24040 / WGSW-24040R
177
SGSW-24040 / SGSW-24040R