Cleaning & Storage - NewAir G56 Owner's Manual

Your heater is equipped with a thermostat. The thermostat function controls
the temperature output.
 Turn the unit on by turning the thermostat control knob away from the LOW
position (clockwise).
 For faster heat-up or to increase the heat output, turn the thermostat
control knob clockwise all the way to HIGH.
 To decrease the heat output, turn the knob counterclockwise.
 Once the room reaches the desired temperature, slowly turn the thermostat
control knob counterclockwise until you hear a "click." This sets the heater
to cycle ON/OFF to maintain the desired heating temperature for energy
efficiency.
 To completely shut the unit OFF, turn the thermostat control knob to the
LOW position and unplug the heater.
The unit's fan has two settings:
ON – operates the fan continuously.
AUTO – cycles fan on and off as needed to maintain ambient
temperature.
CLEANING & STORAGE
B
EFORE ANY CLEANING
1. The heater is turned off.
2. The power supply is disconnected at the source by removing the plug from
the power outlet.
R C
EGULAR LEANING
1. Do not use cleaning liquid or other chemicals to spray on the unit.
2. Interior dust can often be removed by using a vacuum cleaner with a
crevice tool attachment.
,
MAKE SURE THAT
:
A Name You Can Trust
7
: