Page 1
AH-450B Oil Filled Heater OWNERS MANUAL Read and save these instructions.
Page 2
Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
Before First Use……………………………………………………………………………………………….. Important Instructions………………………………………………………………………..…………… Parts List………………………………………………………………………………………………………….. Assembly Instructions……………………………………………………………………………………… Operating Instructions……………………………………………………………………………………… Using the Remote Control……………………………………………………………………………….. Safety Features………………………………………………………………………………………………… Cleaning & Storage………………………………………………………………………………………… Troubleshooting…………………………………………………………………………………………….. Limited Manufacturer’s Warranty………………………………………………………………….. SPECIFICATIONS AH-450B ODEL 120V OLTAGE: 12.5A URRENT: HI=1500W; LO=900W OWER ONSUMPTION: 5120 BTUs UTPUT: BEFORE FIRST USE •...
It is normal for the plug to feel warm to the touch; AUTION: however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace a loose or worn outlet. http://www.NewAir.com...
• To disconnect the heater, first turn controls to the OFF position, then remove plug from the outlet. Never pull by the cord. • No object should be inserted into any part of the heater at any time. • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
fixed between the last two fins and the other one is fixed under the metal control box. Fix the castors to the vertical axis of both the wheel holding plates. 4. Insert the butterfly nuts and tighten them securely . 5. Turn the heater upright. Your heater is now ready to use. http://www.NewAir.com...
WARNING: Risk of fire. Do not operate heater without wheel assemblies attached. Operate heater in upright position only (wheels on bottom, controls on top). Ensure that the surface beneath the heater is clean and free of any obstructions. It is not recommended that this heater be placed on high-pile carpeting or any other surface that impedes the flow of air underneath the heater.
Page 8
2 hours. Press the timer button repeatedly to automatically turn on the heater at any desired hour set in a sequence of 2-4-6-8-10. The timer is adjustable up to 10 hours with an interval rate of 2 hours. http://www.NewAir.com...
B. Setting the timer to turn off the heater. Press the timer button once when the heater is in operation. The “2H” icon will be displayed on the control panel to indicate that the heater will turn off in 2 hours. Press the timer button repeatedly to automatically turn off the heater with a selected number of hours in a sequence of 2-4-6-8-10.
10 minutes for it to cool down. Carefully remove the obstruction. Plug the heater in and restart it as described in the OPERATING INSTRUCTIONS section. If you still notice the same problem, remove the plug from the outlet and contact the NewAir Customer Support Department. http://www.NewAir.com...
Page 11
Problem Possible Causes Solution The room is too large Close the window. Turn on the main or a window is open. heat source of the room and possibly The room is use more portable heaters. not hot enough. The set temperature Increase the temperature or or power setting is power setting.
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.