Windows 98Se; Windows 2000 - Linksys Instant Powerline PLUSB10 Quick Installation

Installing the USB Driver for the
PowerLine USB Adapter
Proceed to the instructions for your operating system: Windows 98SE, 2000,
Millennium, or XP. Note: Your Windows operating system may ask for its
Windows Installation Files.

Windows 98SE

A. Windows 98SE will automatically detect the presence of the PowerLine
USB Adapter in your computer after you have completed the hardware
installation.
B. Windows will ask you to supply your Windows 98SE Installation Files.
Insert the Windows 98SE CD-ROM into the CD-ROM drive of your com-
puter. Then click the OK button to continue.
B
C. A Version Conflict screen may appear if an older file is being copied. If
your existing file is newer and you want to keep it, click the Yes button.
If you want the old file to overwrite the new file, click the No button.
C
D. After Windows is finished installing the driver automatically, a screen will
appear asking you to restart your computer. Click the Yes button to restart
your computer or click the No button to restart later.
D
Your driver installation is complete. For setup information or any other
questions, refer to the User Guide.

Windows 2000

A.Windows 2000 will automatically detect the presence of the PowerLine USB
Adapter in your computer after you have completed the hardware installa-
tion. Windows will inform you that there was no digital signature found.
Click the Yes button to install the USB driver.
A
Your driver installation is complete. For setup information or any other
questions, refer to the User Guide.
Windows Millennium
A. Windows Millennium will automatically detect the presence of the
PowerLine USB Adapter in your computer after you have completed the
hardware installation and will automatically install the driver for you.
Your driver installation is complete. For setup information or any other
questions, refer to the User Guide.
Windows XP
A. Windows XP will automatically detect the presence of the PowerLine USB
Adapter in your computer after you have completed the hardware installa-
tion. Click the radio button next to Install the software automatically
(Recommended). Then click the Next button
.
A
B. Windows will notify you that the driver has not passed Windows Logo
testing. Click the Continue Anyway button.
B
C. Windows will tell you when it has finished installing the new driver. Click
the Finish button.
C
Your driver installation is complete. For setup information or any other
questions, refer to the User Guide.
QI-PLUSB10 ver. 2-112202-BW
W W W . L I N K S Y S . C O M