Chapter 3: Getting To Know The Wireless-G Usb Network Adapter; The Adapter's Leds; Chapter 4: Software Installation And Configuration For Windows 2000 - Linksys Wireless-G USB User Manual

Chapter 3: Getting to Know the
Wireless-G USB Network Adapter
The USB Port
The Network Adapter is connected to your PC through its USB port. All power
is provided through the USB connection, making a power adapter unnecessary.

The Adapter's LEDs

The Network Adapter's LEDs show you how the Adapter is functioning.
Power Green. This LED will light up to let you know that the Adapter is
adequately powered over the USB connection.
Link Green. The Link LED will be lit steadily when the Network
Adapter is connected to your wireless network. The LED will
blink when there is wireless network traffic.
4
Chapter 4: Software Installation and
Configuration for Windows 2000
The Wireless-G USB Network Adapter Setup Wizard will guide you through
the installation procedure. The Setup Wizard will install the WLAN Monitor
and driver, as well as configure the Adapter.
Important: You must run the Setup Wizard to install the software
before connecting the Adapter.
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 4-1 should appear. If it does
not, click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (if "D" is the letter of your CD-ROM drive).
Figure 4-1
To install the Adapter, click the Install button on the Welcome screen. Click
User Guide to view this User Guide or click Exit to exit the Setup Wizard.
5