Chapter 4: Software Installation And Configuration For Windows 98Se, Me, And 2000; Figure 4-1: The Setup Wizard's Welcome Screen - Linksys WUSB11 User Manual

Wireless-B USB Network Adapter
Chapter 4: Software Installation and Configuration for
Windows 98SE, Me, and 2000
The Wireless-B USB Network Adapter Setup Wizard will guide you through the installation procedure for Windows
98SE, Me, and 2000. The Setup Wizard will install the Wireless Network Monitor and driver, as well as configure
the Adapter.
NOTE FOR WINDOWS XP USERS: Do NOT run the Wireless-B USB Network
Adapter Setup Wizard. Proceed directly to "Chapter 5: Hardware Installation."
NOTE FOR WINDOWS 98SE, ME, AND 2000 USERS: You must run the
Setup Wizard to install the software before installing the hardware.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears,
enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
On the Welcome screen, you have the following choices:
Install - Click the Install button to begin the software installation process.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.

Chapter 4: Software Installation and Configuration for Windows 98SE, Me, and 2000

software: instructions for the computer

Figure 4-1: The Setup Wizard's Welcome Screen

software: instructions for the computer
7