Advertisement
4. The next screen
will indicate that all
of the appropriate
files
are
being
copied onto your
drive. (See Figure
2-16.) Click the
Cancel button if
you need to stop
the installation for
any reason.
5. Once Windows has finished copying the necessary files, a screen similar to
that shown in Figure 2-17 will appear. In order for the drivers to be
installed properly, you must restart your computer. If you choose to do it
now, select Yes, I want to restart my computer now. If you do not want
to do it now, choose No, I will restart my computer later. Once you have
made your choice, click the Finish button to continue.
Note:
Restart the computer and go to Chapter 5:
Installing the Network PC Card for further instructions.
13
Instant Wireless
Figure 2-16
Figure 2-17
Network PC Card
Series
TM
Chapter 4: Installing the Drivers
and Configuration Utility for
Windows XP
Windows XP will automatically walk you through the driver installation
process as well as automatically configure the Network PC Card for your wire-
less network. If you have any questions regarding wireless networking on your
Windows XP PC, please refer to your Windows XP documentation.
To install the Network PC Card's drivers, insert the Setup Utility CD-ROM into
your CD-Rom drive and then insert the card into your PC's PCMCIA slot.
Windows XP will automatically detect the card and search for the appropriate
drivers. The screen in Figure 4-1 will then appear.
Verify that the radio button beside Install the software automatically
(Recommended) is highlighted. If not, click it. Then, click the Next button to
continue.
Figure 4-1
14
Advertisement
