GE JBP19 Use And Care & Installation Manual page 24

OPEMT~G T~ SELF-CLEAN~G OWN
(continued)
How to Set Delay Start of Cleaning
(on some m~els)
Quick Reminder:
1. Latch the door.
2. Turn the Oven Temperature Control knob to
AUTO SELF CLEAN.
3. Press the START TIME ON/OFF pad.
4. Press the HOUR and MIN. pads to set the
time of day you want cleaning to start. The
Self-Clean Cycle will automatically begin
at the time you selected.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
For example: Let's say it is 7:00 and you want the
oven to begin self-cleaning at 9:00 after you're
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and 20 minutes is prefemed.
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
handle. Forcing the handle s
will damage the door lock
Ill\*
mechanism.
3. Turn the Oven Temperature knob to the
AUTO SELF CLEAN position.
n
4. Press the START TIME ON/OFF pad.
9 fg{
A
5. Press the HOUR pad until 9:00 appears
@
in the display. The timer is now set to
start cleaning in 2 hours, at 9:00.
HOUR
The Self-Clean Cycle will be set to
v
e
automatically begin at 9:00 and finish
at 1:20.
Both the OVEN ON light and the
LATCH DOOR light will flash when
the clean time is finished.
6. When the LATCH DOOR light flashes, slide the
latch handle to the left as far as it will go, turn the
Oven Temperature knob to OFF and open the door.
Never force the latch handle. Wait until the LATCH
DOOR light flashes and the latch slides easily.
Forcing the latch handle may damage the door lock.
24