Frequently Asked Questions - Miele Novotronic G 851 SC Plus Operating Instructions Manual

Hide thumbs Also See for Novotronic G 851 SC Plus:
Table of Contents

Advertisement

What if ...
dishes are not clean?
tea or lipstick stains
have not been com-
pletely removed?
white residue is visible
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
there is a bluish sheen
on the surface of
glasses and film can be
wiped off?
glasses are dull and dis-
colored and film cannot
be wiped off?

Frequently asked questions

Possible fault
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was dispensed.
The spray arm jets are
clogged.
The triple filter is clogged
or not correctly seated.
The wash temperature of
the selected program was
too low.
Not enough detergent
was used.
Not enough rinse aid was
used.
The salt reservoir is
empty.
The salt reservoir cap was
not correctly screwed on.
The programmed setting
of the water softener is too
low.
The rinse aid dosage is
set too high.
Glasses are not dish-
washer safe.
Fix
See, "Loading the dish-
washer".
Select a more intensive
program see, "Program
guide".
Use more detergent, see,
"Adding detergent".
Clean the spray arm jets,
see, maintenance instruc-
tions.
Clean and reseat the filter,
see, maintenance instruc-
tions.
Select a program with a
higher temperature.
Use more detergent.
Increase the dosage,
see "Before using for the
first time".
Add reactivation salt,
see "Before using for the
first time".
Reseat it making sure it
screws back on correctly.
Adjust the setting of the
water softener , see "Be-
fore using for the first
time".
Reduce the dosage, see
"Before using for the first
time".
There is no remedy.
Only wash dishwasher
safe glasses.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents