Miele Novotronic G 851 SC Plus Operating Instructions Manual page 38

Frequently asked questions
What if ...
the "End", "Start" and
"Top Solo" indicators
flash at the same time at
the end of a program?
there is a knocking
noise in the wash cabi-
net?
there is a rattling noise? Items are not secure in
there is a knocking
noise in the water
pipes?
the dishes are not dry,
glasses and cutlery are
spotted?
38
Possible fault
There may be a technical
fault.
The spray arm is hitting
an item in the basket.
the wash cabinet.
This may be caused by
the installation or the di-
ameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Extended drying is not ac-
tivated.
Dishes were taken out too
soon.
Fix
– Turn the program selec-
tor to "Stop".
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired pro-
gram.
– Press the "Start" button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Interrupt the program, re-
arrange items blocking
the spray arms.
Interrupt the program and
rearrange loose pieces.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Activate the Extended
drying feature.
Leave dishes in longer.