Frequently Asked Questions; Technical Faults - Miele G 2430 Operating Instructions Manual

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Issue
The Start/Stop indicator
does not flash after the
dishwasher was turned
on with s.
The dishwasher stops
during a program.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash simultaneously.
The time display shows
FXX.
The drain pump is
running when the door
is open.
36
All manuals and user guides at all-guides.com
Possible fault
The machine is not
plugged in.
The fuse has tripped.
The fuse has tripped.
There may be a technical
fault.
Fault F70:
The waterproof system
has activated.
Solution
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the dishwasher off
s.
After a few seconds:
– Turn the dishwasher on.
– Select the desired
program with the
program button.
– Press the "Start/Stop"
button.
If the problem persists call
Technical Service.
– Turn off the water
supply.
– Call Miele Technical
Service.