Elec. Stabil. Prog - Mercedes-Benz C-Class Operator's Manual

Instruments
Operation
and controls
Malfunction and warning messages
ELEC. STABIL. PROG. (Electronic stability program)
Line 1

ELEC. STABIL. PROG.

ELEC. STABIL. PROG.
DISPLAY DEFECTIVE
* C = Category, see page 293
Instrument
Driving
cluster display
Line 2 C*
1, 2, 3, 4
NOT AVAILABLE! 2
1, 5
VISIT WORKSHOP! 2
6
VISIT WORKSHOP! 2
Practical hints Car care
300
1 The enhanced vehicle stability offered by ESP and the torque
reduction feature are unavailable.
2 This message may be displayed if the power supply was
interrupted (battery disconnected or empty). Synchronize ESP, see
page 279
3 The system is temporarily unavailable. The reason could be that
the self-diagnosis has not been completed. The display will clear
itself after driving a short distance at more than 12 mph
(2o km/h).
4 The system is unavailable due to low voltage, e.g. battery not being
charged.
5 A malfunction has been detected in the system. In case of ESP
malfunction the ESP warning lamp in the instrument cluster
illuminates and the ESP switch in the center console does not
function. If in addition the ABS is malfunctioning, only partial
engine output will be available.
6 The display or the system is malfunctioning.
Technical
Index
data