Storing Stations; Retrieving A Station From Memory; Direct Frequency Input Am And Fm Only; Cassette Mode - Mercedes-Benz C-Class Operator's Manual

Instruments
Operation
and controls
Audio system

Storing stations

Hold the desired number button
approximately 2 seconds. The currently displayed
frequency is stored on the selected station button. The
storage procedure is confirmed by a short signal tone.

Retrieving a station from memory

Press the desired station button
Direct frequency input (AM and FM only)
the frequency ranges (frequencies specified on
page 179) will not be accepted. The frequency input
mode is cancelled if no button is pressed within
4 seconds.
Instrument
Driving
cluster display
0
- down for
O P R
0
- .
O P R
Select the band. Press the
" button and enter the
desired frequency using the
alpha-numeric keypad
0 . Frequencies outside of
O P R
Practical hints
182

Cassette mode

Playing cassettes

Press the T A P E button. When the
the display folds down and the cassette slot becomes
visible. Push the cassette gently into the slot until it
engages. The cassette will be pulled in automatically.
Note:
Do not press directly on the display face.
Return the display panel to its normal position by
folding it back up and pressing gently on the display
frame to lock in place.
-
Important!
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
Technical
Car care
data
button is pressed,
E J
Index