Mercedes-Benz C-Class Operator's Manual page 89

Instruments
Operation
and controls
Restraint systems
Child seat mounts - "LATCH" type
This vehicle is provided with two "LATCH" (Lower
Anchors and Tethers for CHildren) type mounts (at
each of the outer rear seats) for the installation of a
"LATCH" child seat having the matching mounting
fittings. The mounts can be folded back between the
seat cushion and the backrest.
Instrument
Driving
cluster display
2
1
P 9 1 . 1 2 - 2 2 3 3 - 2 6
Practical hints Car care
86
To install a "LATCH" type child seat, the mounts (1)
must be folded forward until they lock in place. To do so,
grip inner side of mounts and fold forward. Install child
seat according to the manufacturer's instructions.
The child seat must be firmly attached in the right and
left side mounting fittings (1).
To fold mounts (1) back, press down button (2) on each
mount and return mount into its catch.
Non-"LATCH" type child seats may also be used and are
capable of being installed using the vehicle's seat belt
system. Install child seat according to the
manufacturer's instructions.
Note:
With a child seat installed in the left rear seat, the seat
belt for the center seat occupied by a passenger must
operate freely. Guide seat belt between its seat cushion
mount and backrest mount along outside of right side
child seat mount.
Technical
Index
data