ELEC. STABIL. PROG.
(Electronic stability program)
Line 1
DISPLAY DEFECTIVE
ELEC. STABIL. PROG.
1 A malfunction has been detected in the system. Pressing the
accelerator pedal will require greater effort. Only partial engine
output will be available.
2 This message may be displayed if the power supply was
interrupted (battery disconnected or empty).
3 Synchronize ESP. See page 219.
Malfunction and warning messages
Instruments
Operation
and controls
Line 2
VISIT WORKSHOP!
1, 2, 3
VISIT WORKSHOP!
Instrument
Driving
cluster display
REMOVE KEY
Line 1
This message plus an audible alarm indicate that the
electronic key is in steering lock position 0 or 1, and the
driver's door is open.
243
Practical hints
Car care
P54.30-3573-21
Line 2
REMOVE KEY!
Technical
data
Index