Table of Contents
Advertisement
Installation
System Diagram
UTP Power Supply Link Setup
1. SUD-2080F
→
4Ch Power Supply
→
4Ch Receiver
The maximum power transmission distance for the camera is 300m(1000ft), and the
distance between the camera and the 4ch Receiver cannot exceed 900m(3000ft).
SPU-400T
300m(1000ft) or Less
900m(3000ft) or Less
SUD-2080F
2. UTP Receiver Link Setup(Additional Power input is needed)
→
→
SUD-2080F
1Ch Passive Receiver
DVR
300m(1000ft) or Less
1Ch Passive Receiver
16
COLOR DOME CAMERA
→
DVR/Monitor/Controller
RS-485
VIDEO
SPU-400R
SCC-3100A
UTP CABLE
BNC CABLE
RS-485
→
Monitor
User Guide
Notes
• U sing the product with third-party UTP peripherals may result in degradation of product
function and performance.
• A ttenuation and distortion in signal may occur if the maximum transmission distance is
exceeded. Please note that depending on the installation environment/condition, the
signal may become attenuated and distorted and cause the camera to function
incorrectly even when the transmission distance is within the maximum.
• I f using RS-485 communication, please use the STW1, STW2, PELCO-D, PELCO-P, BOSCH,
HONEYWELL, VICON and PANASONIC Protocol.
• I f you are using the 1Ch Passive Receiver system setup, please connect the adapter
(AC 24V or DC 12V) directly to the camera.
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control
data.(TIA/EIA-568B)
No.
Line Color
Camera to Power Supply
1
White+Orange
VIDEO (+)
2
Orange
VIDEO (-)
3
White+Green
RS485 (+)
4
Blue
POWER (-)
5
White+Blue
POWER (+)
6
Green
RS485 (-)
7
White+Brown
POWER (+)
8
Brown
POWER (-)
1
8
COLOR DOME CAMERA
Power Supply to Receiver
VIDEO (+) / RS-485 (+)
CH1
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH2
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH3
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH4
VIDEO (-) / RS-485 (-)
8
1
17
User Guide
Advertisement
Table of Contents
