Table of Contents
Advertisement
Operating Your Camera
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal' by using the Function
Setup switch so that the arrow indicates 'White Bal' .
2. Select a desired mode using the Function Setup switch.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
※ Select one of the following 5 modes, as appropriate for your purpose.
ATW
: Select this when the color temperature is between 1,700˚K and
11,000˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
INDOOR
: Select this when the color temperature is between 4,500˚K and
8,500˚K.
MANUAL
: Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and the Function Setup switch.
AWC →SET : To find the optimal luminance level for the current environment, point
the camera towards a sheet of white paper and press the Function
Setup switch. If the environment changes, readjust it.
Notes
• White Balance may not work properly under the following conditions. In this case select
the AWC mode.
When the color temperature of the environment surrounding the subject is out of the
❶...... ... ...
control range (e.g. clear sky or sunset).
2
...When the ambient illumination of the subject is dim.
I f the camera is directed towards a fluorescent light or is installed in a place where
3 ......
illumination changes dramatically, the White Balance operation may become unstable.
24
COLOR DOME CAMERA
DC
ATW
OFF
User Guide
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter
areas to even out the overall brightness of images with high contrast between bright and
dark areas.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
1. When the SETUP menu screen is displayed, select 'SSDR' by using the Function Setup
switch so that the arrow indicates 'SSDR'.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SSDR ON
BACKLIGHT
The SUD-2080F is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, by adopting a function of the proprietary
W-V DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates 'BACKLIGHT'.
COLOR DOME CAMERA
DC
ATW
OFF
OFF
SSDR OFF
25
User Guide
Advertisement
Table of Contents
