Table of Contents
Advertisement
Operating Your Camera
2. Select a desired mode using the Function Setup switch.
SPECIAL
1. IMAGE ADJ
2. MONITOR
3. CAM TITLE
4. SYNC
5. MOTION DET
6. PRIVACY
7. COMM ADJ
8. LANGUAGE
9. RETURN
IMAGE ADJ :
1) When the SPECIAL menu screen is displayed, select 'IMAGE ADJ' by using the
Function Setup switch so that the arrow indicates 'IMAGE ADJ'.
2) Select a desired mode using the Function Setup switch.
IMAGE SETUP
1. V-REV
2. H-REV
3. D-ZOOM
4. DIS
5. FONT COLOR
6. SHARPNESS
7. RETURN
• V-REV
: You can flip the picture vertically on the screen.
• H-REV
: You can flip the picture horizontally on the screen.
• D-ZOOM
: You can use a digital zoom of x1 ~ x16.
• DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to
external factors such as wind.
• FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
• SHARPNESS : As you increase this value, the picture outline becomes stronger and
30
COLOR DOME CAMERA
LCD
OFF
INT
OFF
OFF
ENGLISH
OFF
OFF
OFF
OFF
WHITE
ON
User Guide
clearer. Adjust this value appropriately depending on the sharpness of
the picture.
• RETURN
: Select this to save the settings for the IMAGE ADJ menu and to return
to the SPECIAL menu.
Notes
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or
noise may appear.
• As the DIS function uses the digital zoom, the camera's resolution will decrease.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or white wall.
Monitor : Please change the settings value of video
appropriate to your monitor.
- LCD : Please select this menu item when using an
LCD monitor.
You can change the gamma, PED level and
color gain in the sub menus.
- USER : Please use this menu item when using a monitor
other than standard ones. You can change the gamma, PED level, and color gain in
the sub menus.
- CRT : Please select this menu item when using a CRT monitor. You can change the PED
level, color gain in the sub menus.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Function Setup
switch.
Press the Function Setup switch.
3)
4) Use the Function Setup switch to move
to a desired letter and select the letter by
pressing the Function Setup switch.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
COLOR DOME CAMERA
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
← → C L R P O S E N D
31
User Guide
Advertisement
Table of Contents
