Table of Contents
Advertisement
Operating Your Camera
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus
Settings mode. To a Activate the Focus Settings mode, adjust the lens
focus, and then deactivate the settings mode.
You can adjust the minimum shutter and maximum value of ESC shutter mode.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
SHUTTER : You can select the shutter.
- ---
: Shutter speed is fixed at 1/60sec(1/50sec).
- ESC
: Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60sec~1/120,000sec, PAL MODEL : 1/50sec~1/120,000sec)
- A.FLK
: Select this when you experience picture flicker, this happen when there
22
COLOR DOME CAMERA
DC
ATW
25
---
HIGH
OFF
User Guide
is a clash with the installed lighting frequency.
Notes
• Set the shutter mode to - - - if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
the higher the noise.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
Notes
• If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
RETURN : Select this to save the changes in the EXPOSURE menu and return to the
SETUP menu.
23
COLOR DOME CAMERA
User Guide
Advertisement
Table of Contents
