Operation And Maintenance Guidelines - Superior WRT6036RS Installation And Operation Instructions Manual

GLASS DOORS
Glass doors are optional with the fireplace. When fireplace is in operation,
doors must be fully opened or fully closed position only or a fire hazard
may be created (see Figure 33).
A fireplace equipped with glass doors operates much differently than a
fireplace with an open front. A fireplace with glass doors has a limited
amount of air for combustion.
Excessive heat within the fireplace can result if too large a fire is built or
if combustion air gate is not completely open. The following tips should
be followed to assure that both the fireplace and glass door retain their
beauty and function properly. Both the flue damper and glass doors must
be fully opened before starting fire. This will provide sufficient combustion
air and maintain safe temperatures in firebox.
IMPORTANT: The glass must be allowed to warm slowly and evenly.
The tempered glass will withstand a gradual temperature rise to 550° F,
which is more than a normal fire will generate. Such materials as pitch/
wax laden logs, very dry mill end lumber and large amounts of paper or
cardboard boxes can create an excessively hot fire and should not be
burned in this fireplace. Always keep the fire well back from the doors
and never allow flames to contact the glass.
WARNING: Fireplaces equipped with glass doors
should be operated only with doors fully opened or
doors fully closed. Doors, if left partly open, may draw
gas and flame out of the fireplace opening creating
risks of both fire and smoke.
Cleaning Glass
Clean glass with any commercial glass cleaner or soap and water. Do
not use any abrasive material to clean glass. Do not clean glass with any
cool water if glass is still hot from the fire and smoke.
Doors Fully Closed
Fireplace Front
Fully Opened
Fireplace Front
Figure 33 - Bi-Fold Glass Doors
18

OPERATION AND MAINTENANCE GUIDELINES

Doors
Superiorfireplaces.US.com
OUTSIDE AIR AND DAMPER HANDLE OPERATION
The damper handle, which opens and closes the damper blade, is
located in the upper front face of the fireplace. Pushing the handle
forward and up through the keyway slot will free damper blade to
automatically open. Pushing the handle forward and down will lock
damper blade closed (see Figure 34). Damper must be locked in the
full open position before operating fireplace (see Figure 34).
CAUTION: When operating damper door, please
be aware of sharp edges and corners. Open and close
damper door slowly to avoid injury.
To Close
Damper
To Open
Damper
Figure 34 - Operating Damper Handle
Damper
Weight
Damper
Weight
126595-01C