Sanyo PDG-DWL100 Service Manual page 5

No Item
15 Terminals
16 System Controller
17 Color Wheel
18 Lamp
19 Temperature
20 Altitude
21 Input Signal
● One Mini DIN 8-Pin Connector for RS232 control input
● One 19-pin HDMI(V1.3) for Digital Video Data Input
● One Mini DIN 4-pin for S-Video Input
● One RCA Jack for Composite Video Input
● One D-Sub 15-pin female connector for VGA output
(Only for VGA 1)
● Two D-Sub 15-pin female connector for VGA input (Stack)
and component video input
● One RJ45 connector for Network Management
● One 3.5 mm phone jack for audio input
● One 3.5mm phone jack for variable audio output
*Selectable cable control via either RS232 or RJ-45 LAN by
OSD menu.
● TI DDP2230
● 40mm diameter, 5 segments (R80Y30G84W90B76) &
7200 rpm
● 225W Lamp (Philips E20.9)
● Operating: 5 ~ 35°C
● Storage: -20 ~ 60°C Storage: -20 ~ 60°C
● Operating: 0 ~ 2,500 ft, for 5°C~35°C
2,500 ft ~ 5,000 ft, for 5°C~30°C
5,000 ft ~ 10,000 ft, for 5°C~25°C
● Storage: 40,000 ft Storage: 40,000 ft
● Hsync Fre�uency 31.35 k ~ 79.98 k Hz Hsync Fre�uency 31.35 k ~ 79.98 k Hz
● Vsync Fre�uency 50 ~ 75 Hz Vsync Fre�uency 50 ~ 75 Hz
● Video Signal RGB (PC) Video Signal RGB (PC)
• Analog RGB 0.7Vp-p, 75 ohm, Separate TTL H,V Sync
• Analog RGB 1Vp-p, 75 ohm, Sync. On Green signal Analog RGB 1Vp-p, 75 ohm, Sync. On Green signal
• Analog RGB 0.7Vp-p, 75 ohm, Composite TTL Sync Analog RGB 0.7Vp-p, 75 ohm, Composite TTL Sync
● Video Video
• Composite video 1Vp-p, 75 ohm Composite video 1Vp-p, 75 ohm
• S-video Luminance 0.714Vp-p, 75 ohm S-video Luminance 0.714Vp-p, 75 ohm
• Chrominance 0.286Vp-p, 75 ohm Chrominance 0.286Vp-p, 75 ohm
• Component Video 1Vp-p, 75 ohm Component Video 1Vp-p, 75 ohm
Description
Confidential
PDG-DWL100
1-2