Sanyo PDG-DWL100 Service Manual page 15

4. Unplug 5 connectors (as yellow square).
Note: - Make sure cables plug into the correct
ports when assembling the unit.
Please refer to the below table details of
each connector on Main Board.
Male Connector
Item
on Main Board
A Photo Sensor
B Blower
C Fan
D Speaker
E Lamp Driver
The key feature
Compose of Red/Black/White
Wire and Black wire tube (3 pin)
Compose of Red/White/Black
Wire and Blue wire tube (3 pin)
Compose of Red/Black/Yellow
Wire (3 pin)
Compose of Red/Black Wire and
Black wire tube (2 pin)
Black wire tube (5 pin)
A
B
PDG-DWL100 Confidential
C D E
Figure
2-7