Others - Sanyo PDG-DWL100 Service Manual

(5) Click "Close" to quit the setting screen. "Close" to quit the setting screen. Close" to quit the setting screen. " to quit the setting screen. to quit the setting screen.
3. Read Projector Information
(1) Connect the PC and the Projector with LAN Cable.
(2) Execute "Internet Explorer". "Internet Explorer". Internet Explorer". ". .
(3) Visit the IP address: "http://192.168.0.100/".
- Key in "User Name: Administrator" and "Password: "User Name: Administrator" and "Password: User Name: Administrator" and "Password:
admin", click "Login" to get into Projector Web Server. ", click "Login" to get into Projector Web Server. , click "Login" to get into Projector Web Server.
(4) Projector information will be shown on the screen.
- Please check whether web management, FW version
and model name are right.

4-12 Others

1. Functional Inspection
Keypad button
Remote Controller
General
Factory Default
"http://192.168.0.100/". http://192.168.0.100/". ". .
"Login" to get into Projector Web Server. Login" to get into Projector Web Server. " to get into Projector Web Server. to get into Projector Web Server.
- All keypad buttons must operate smoothly.
- Check whether the remote controller can work normal, "Menu",
"Left" and "Right" buttons work smoothly.
- All OSD functions must be checked for functionality. When OSD
menu is displayed, there shall be no visible peaking, ringing,
streaking, or smearing artifacts on the screen.
- The factory settings (with appropriate centering, size, geometry
distortion, etc.) shall be displayed upon "Recall" is selected from
OSD.
" and "Password: and "Password: "Password: Password:
PDG-DWL100
Confidential
4-14