Dodge DART User Manual page 74

ELECTRONICS
Stored Message
• Press and release the UP
highlighted in the EVIC. This feature shows the number of stored warning messages.
Pressing the RIGHT
the LEFT button to return to the Main Menu. The inner ring of the display will
illuminate grey under normal conditions, yellow for non critical warnings, red for critical
warnings and white for on demand information.
Screen Setup
• Screen Setup Display Analog Icon
• Screen Setup Display Digital Icon
• Press and release the UP
highlighted in the EVIC. Press and release the RIGHT
Setup sub-menu. The Screen Setup feature allows you to change what information is
displayed in the instrument cluster as well as the location that information is displayed.
• Press and release the UP
highlighted in the EVIC. Press and release the RIGHT
Setup sub-menu. The Screen Setup feature allows you to change the location that
information is displayed within the instrument cluster. Use the UP and DOWN buttons to
highlight a screen setup location (i.e., Upper Left, Upper Right, etc.) then press the RIGHT
arrow button to select the location and make changes. Press the UP and DOWN buttons
to select the information you would like to display in that location (i.e., Date, Time,
Outside Temp, etc.) and press the RIGHT arrow button to save the display setting. You can
press the LEFT arrow button at any time to back out of a sub-menu selection.
NOTE:
This option is only available when the vehicle is in the Park position.
72
or DOWN button until the Messages display icon is
button will allow you to see what the stored messages are. Press
or DOWN button until the Screen Setup display icon is
or DOWN button until the Screen Setup display icon is
button to enter the Screen
button to enter the Screen